EM 6000-Dante-EU
Higher channel density with maximum signal reliability at the same time:
Digital 6000 is intermodulation-free and assures through its equidistant
frequency grid excellent spectral efficiency and the simplest frequency
configuration– even in the toughest frequency environments where
other systems already fail. Error correction and audio error masking
recognize and fix problems long before they even become audible.
When it comes to setup and the user interface,
the EM 6000 stands out for clarity, relevance and short pathways.
Digital 6000 can be seamlessly integrated into existing digital or
analog infrastructures. The EM 6000 receiver has a digital AES-3 output
with word clock inputs and outputs, high-quality transformer-balanced analog XLR
and 6.3 mm jack outputs as well as a 6.3 mm headphone output.
The Dante™ version with an Audinate Brooklyn ll card additionally offers
two Amphenol RJ-45 connectors for integrating the receiver
into a Dante™ network, for redundant networks or daisy chain cabling.
Whether we’re talking about reducing information down to the really meaningful
key values or smart menus on a high-contrast OLED display, every operating
element is a result of practical experience and designed for practical use.
All the vital parameters are summarized in one view.
Important functions can be reached directly via home screens without long navigation paths.
The auto-setup enables scanning and frequency distribution to all connected
devices directly via the receiver; naturally Digital 6000 can also be
monitored and configured via the Wireless System Manager (WSM).
The EM 6000 is compatible with UHF Sennheiser antenna systems.
Dimensions 44 x 483 x 373 mm
Frequency response 30 Hz - 20 kHz (1.5 dB)
THD, total harmonic distortion < 0.03 % (@ 1 kHz)
Weight Approx. 5.2 kg
Power consumption Max. 35 W
Audio output Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
Can be externally synchronized using WCLK loop-through with BNC sockets
Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in steps of 1 dB (2 kO)
Storage temperature -25°C to +70°C
Operating temperature -10°C to +50°C
Switching bandwidth 244 MHz
Power supply 100 - 240 V AC, 50/60 Hz
Antenna connector Input 2x BNC (50 O), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 ?)
Dynamic range 111 dB (A) type
Frequency range 470 - 714 MHz
Headphone output level 6.3 mm jack, 2x 100 mW at 32 O
Image rejection > 100 dB typ.
Sensitivity -100 dBm typ.
Word clock Input: BNC, 75 O
Output: BNC, 75 O
Sampling Rates: 48 kHz, 96 kHz
Operating relative humidity Operation: Max. 85% at 40°C (non-condensing)
Storage: Max. 90% at 40°C (non-condensing)
Transmission method Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz
Latency Analog Audio Out: 3 ms
Digital Audio Out: 3 ms (AES/EBU)
Audio codec SeDAC (Sennheiser Digital Audio Codec)
Network protocol IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
Receiver Principle Double superheterodyne
Diversity principle True bit diversity
Encryption AES 256
Daisy chain outputs 2x BNC (50 O) 0 dB +/- 0.5 dB amplification relative to antenna inputs
Receiving channels 2
Daisy-chained receivers (RF) Max. 8 EM 6000 units
Dante™ (only EM 6000 DANTE) IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection
Power plug 3-pin, protection class I as per IEC/EN 60320-1
Water Protection Code The product must not be exposed to dripping and splashing (IP2X)